Catalog

Browse every supported control measure. Each entry shows its geometry, required points, configurable options, and a live preview.

146 control measures

11Command and Control Lines04

Boundary

110100boundaryline2+ points

Delineates the area of responsibility between two adjacent units, labeled with the echelon and the designators of the units it separates.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`echelon`	Echelon	enum`"none""team""squad""section""platoon""company""battalion""regiment""brigade""division""corps""army""army-group""region""command"`	primary	doctrinal	`"battalion"`	Field B unit-size amplifier, drawn on the boundary
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the boundary's corners by curving it through the control points.
`echelonSizePixels`	Echelon size (screen)	number (px)	standard	appearance	`16`	Echelon glyph height in screen pixels
`echelonSize`	Echelon size (ground)	number (m)	standard	appearance	`750`	Echelon glyph height in meters
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`echelonPadding`	Echelon padding	number	advanced	appearance	`0.3`	Gap on each side of the echelon, as a ratio of its height
`labelRepetitions`	Label groups	number	advanced	appearance	`1`	Number of label groups spaced evenly along the whole boundary
`labelPosition`	Label position	number	advanced	appearance	`0.5`	Position of the label group along the boundary, from the first point (0) to the last (1)
`labelSpacing`	Label spacing	number	advanced	appearance	`1`	Spread of label groups: 1 spreads evenly, lower clusters them toward the middle.
`labelOrientation`	Label orientation	enum`"along""standard"`	advanced	appearance	`"along"`	Orient the label group along the boundary, or per MIL-STD-2525E Figure L-10: on mostly north–south segments the group rotates perpendicular to the boundary as a single row crossing it.
`labelPadding`	Label padding	number	advanced	appearance	`0.4`	Gap between the line/echelon and the unit labels, as a ratio of the echelon height

Text amplifiers

Field	Label	Description
`T`	Unit designation	Field T — unique designation of the unit on the left-of-travel side.
`AS`	Country	Field AS — country code of the unit on the left-of-travel side.
`T1`	Unit designation (other side)	Field T1 — unique designation of the unit on the right-of-travel side.
`AS1`	Country (other side)	Field AS1 — country code of the unit on the right-of-travel side.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Light line

110200light-lineline2+ points

A line, designated by higher headquarters, forward of which vehicles must use blackout lights at night.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`phaseLineName`	Phase line name	text	primary	doctrinal	—	Name the line as a phase line — rendered "PL <name>" beyond each end of the line.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the phase line name with "PL" (or show the bare name).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance between the line and its labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Engineer work line

110300engineer-work-lineline2+ points

A coordinated boundary compartmentalizing an area of operations to show where specific engineer units have responsibility.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`phaseLineName`	Phase line name	text	primary	doctrinal	—	Name the line as a phase line — rendered "PL <name>" beyond each end of the line.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the phase line name with "PL" (or show the bare name).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance between the line and its labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`T`	Unit designation	Field T — unique designation of the engineer unit on the left-of-travel side.
`AS`	Country	Field AS — country code of the engineer unit on the left-of-travel side.
`T1`	Unit designation (other side)	Field T1 — unique designation of the engineer unit on the right-of-travel side.
`AS1`	Country (other side)	Field AS1 — country code of the engineer unit on the right-of-travel side.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Generic command and control line

110400generic-c2-lineline2+ points

Illustrative command-and-control-style line (not part of MIL-STD-2525E) carrying optional echelon glyphs, additional-information/designation text above it, and an effective date-time-group window below it.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`echelon`	Echelon	enum`"none""team""squad""section""platoon""company""battalion""regiment""brigade""division""corps""army""army-group""region""command"`	primary	doctrinal	`"none"`	Field B unit-size amplifier, drawn on the line
`phaseLineName`	Phase line name	text	primary	doctrinal	—	Name the line as a phase line — rendered "PL <name>" beyond each end of the line.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`echelonSizePixels`	Echelon size (screen)	number (px)	standard	appearance	`16`	Echelon glyph height in screen pixels
`echelonSize`	Echelon size (ground)	number (m)	standard	appearance	`750`	Echelon glyph height in meters
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the phase line name with "PL" (or show the bare name).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`echelonPadding`	Echelon padding	number	advanced	appearance	`0.3`	Gap on each side of the echelon, as a ratio of its height
`labelRepetitions`	Label groups	number	advanced	appearance	`1`	Number of label groups spaced evenly along the whole line
`labelPosition`	Label position	number	advanced	appearance	`0.5`	Position of the label group along the line, from the first point (0) to the last (1)
`labelSpacing`	Label spacing	number	advanced	appearance	`1`	Spread of label groups: 1 spreads evenly, lower clusters them toward the middle.
`labelOrientation`	Label orientation	enum`"along""standard"`	advanced	appearance	`"along"`	Orient the label group along the line, or per MIL-STD-2525E Figure L-10: on mostly north–south segments the group rotates perpendicular to the line as a single row crossing it.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`H`	Additional information	Field H — additional free-text information, shown above the line near each end.
`T`	Unique designation	Field T — unique designation of the line, shown above it near each end.
`T1`	Unit 1 designation	Field T1 — designation of unit 1 on the left-of-travel side.
`AS1`	Unit 1 country	Field AS1 — country code of unit 1 on the left-of-travel side.
`T2`	Unit 2 designation	Field T2 — designation of unit 2 on the right-of-travel side.
`AS2`	Unit 2 country	Field AS2 — country code of unit 2 on the right-of-travel side.
`W`	Effective from (DTG)	Field W — date-time group the line becomes effective, shown below it near each end.
`W1`	Effective to (DTG)	Field W1 — date-time group the line ceases to be effective, shown below it near each end.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

12Command and Control Areas07

Area of operations

120100area-of-operationsarea3+ points

An operational area defined by a commander for land and naval forces, within which the assigned force conducts military operations.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`H`	Additional information	Field H — additional free-text information, shown below the designation.
`W`	Effective from (DTG)	Field W — date-time group the area becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the area ceases to be effective.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Named area of interest

120200named-area-of-interestarea3+ points

A geographical area where information is gathered to satisfy specific intelligence requirements.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Target area of interest

120300target-area-of-interestarea3+ points

The geographical area where high-value targets can be acquired and engaged by friendly forces.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Airfield zone

120400airfield-zonearea3+ points

A zone enclosing an airfield, marked with a runway glyph; Field H carries the airfield type, runway length and other pertinent information.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`true`	Round the area's corners by curving the boundary through the control points.
`glyphSizeRatio`	Runway size	number	standard	appearance	`0.55`	Size of the runway glyph as a ratio of the area's width.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`H`	Additional information	Field H — airfield type, runway length and other information, placed outside the area's east edge.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Base camp

120500base-camparea3+ points

An evolving military facility that supports military operations of a deployed unit and provides the necessary support and services for sustained operations.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`echelon`	Echelon	enum`"none""team""squad""section""platoon""company""battalion""regiment""brigade""division""corps""army""army-group""region""command"`	primary	doctrinal	`"none"`	Field B unit-size amplifier, drawn on the boundary.
`smooth`	Smooth	boolean	standard	appearance	`true`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`echelonSizePixels`	Echelon size (screen)	number (px)	standard	appearance	`16`	Echelon glyph height in screen pixels.
`echelonSize`	Echelon size (ground)	number (m)	standard	appearance	`750`	Echelon glyph height in meters.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`echelonPadding`	Echelon padding	number	advanced	appearance	`0.3`	Gap on each side of the echelon, as a ratio of its height.
`echelonPosition`	Echelon position	number	advanced	appearance	`0`	Slide the echelon along the boundary, as a fraction of the perimeter from the bottom edge.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`H`	Additional information	Field H — additional free-text information, shown below the designation.
`W`	Effective from (DTG)	Field W — date-time group the area becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the area ceases to be effective.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Guerrilla base

120600guerrilla-basearea3+ points

A temporary site where guerrilla installations, headquarters, and units are located.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`echelon`	Echelon	enum`"none""team""squad""section""platoon""company""battalion""regiment""brigade""division""corps""army""army-group""region""command"`	primary	doctrinal	`"none"`	Field B unit-size amplifier, drawn on the boundary.
`smooth`	Smooth	boolean	standard	appearance	`true`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`echelonSizePixels`	Echelon size (screen)	number (px)	standard	appearance	`16`	Echelon glyph height in screen pixels.
`echelonSize`	Echelon size (ground)	number (m)	standard	appearance	`750`	Echelon glyph height in meters.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`echelonPadding`	Echelon padding	number	advanced	appearance	`0.3`	Gap on each side of the echelon, as a ratio of its height.
`echelonPosition`	Echelon position	number	advanced	appearance	`0`	Slide the echelon along the boundary, as a fraction of the perimeter from the bottom edge.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`H`	Additional information	Field H — additional free-text information, shown below the designation.
`W`	Effective from (DTG)	Field W — date-time group the area becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the area ceases to be effective.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Generic command and control area

120700generic-c2-areaarea3+ points

A general-purpose command and control area carrying a designation, additional information and an effective date-time-group window.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`true`	Round the area's corners by curving the boundary through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`H`	Additional information	Field H — additional free-text information, shown below the designation.
`W`	Effective from (DTG)	Field W — date-time group the area becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the area ceases to be effective.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

14Maneuver Lines23

Forward line of own troops (FLOT)

140100flotline2+ points

Indicates the most forward positions of friendly forces at a specific time.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`radiusPixels`	Radius (screen)	number (px)	standard	appearance	`10`	Radius of each scallop arc in screen pixels
`radius`	Radius (ground)	number (m)	standard	appearance	`50`	Radius of each scallop arc in meters
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height
`arcSegments`	Arc segments	number	advanced	appearance	`16`	Number of points used to render each semicircle

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Phase line

140300phase-lineline2+ points

A line used for control and coordination of military operations, usually along a recognizable terrain feature extending across the zone of action.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the end labels with "PL" (or show a bare "PL" with no designation).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance between the line and its labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the phase line's unique designation.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Forward edge of the battle area

140400forward-edge-of-battle-arealine2+ points

The foremost limits of a series of areas in which ground combat units are deployed, excluding the areas in which covering or screening forces operate.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`phaseLineName`	Phase line name	text	primary	doctrinal	—	Name the line as a phase line — rendered "PL <name>" beyond each end of the line.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the phase line name with "PL" (or show the bare name).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance between the line and its labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Final Protective Fire (Left)

140501final-protective-fire-leftline2–3 points

An immediately available, prearranged barrier of fire designed to impede enemy movement across defensive lines or areas. The blade marks the left arm (PT 1 to PT 2).

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.07`	Arrowhead length as a ratio of each arm's length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.67`	Arrowhead base width as a multiple of the arrowhead length
`bladeHeightRatio`	Blade height	number	advanced	appearance	`0.03`	Blade's perpendicular reach into the V, as a fraction of its arm's length

Final Protective Fire (Right)

140502final-protective-fire-rightline2–3 points

An immediately available, prearranged barrier of fire designed to impede enemy movement across defensive lines or areas. The blade marks the right arm (PT 1 to PT 3).

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.07`	Arrowhead length as a ratio of each arm's length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.67`	Arrowhead base width as a multiple of the arrowhead length
`bladeHeightRatio`	Blade height	number	advanced	appearance	`0.03`	Blade's perpendicular reach into the V, as a fraction of its arm's length

Principal Direction of Fire

140503principal-direction-of-fireline2–3 points

A specific direction or sector toward which a weapon or unit directs fire for a tactical purpose.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.07`	Arrowhead length as a ratio of each arm's length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.67`	Arrowhead base width as a multiple of the arrowhead length

Secondary Direction of Fire

140504secondary-direction-of-fireline2–3 points

A direction or sector, in addition to the principal direction, toward which a weapon or unit directs fire for a tactical purpose.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.07`	Arrowhead length as a ratio of each arm's length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.67`	Arrowhead base width as a multiple of the arrowhead length

Direction of Attack — Airborne/Aviation

140601direction-of-attack-aviationline2+ points

The direction or route of an airborne or aviation attack.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the route's total length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`1.15`	Arrowhead total width as a ratio of its length
`bowTieLengthRatio`	Bow-tie length	number	advanced	appearance	`0.1`	Aviation mark length as a ratio of the route's total length
`bowTieWidthRatio`	Bow-tie width	number	advanced	appearance	`0.5`	Aviation mark total width as a ratio of its length
`bowTiePosition`	Bow-tie position	number	advanced	appearance	`0.3333333333333333`	Position of the aviation mark along the route, from tail (0) to tip (1)
`labelPosition`	Label position	number	advanced	appearance	`0.6666666666666666`	Position of the T/W/W1 group along the route, from tail (0) to tip (1)
`labelPadding`	Label padding	number	advanced	appearance	`0`	Extra spacing between the route and the date-time rows, in label heights

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the attack route's unique designation.
`W`	Start date-time group	Field W — the route's start date-time group.
`W1`	End date-time group	Field W1 — the route's end date-time group.

Label placement on a representative shape

Direction of Main Attack

140602direction-of-main-attackline2+ points

The direction or route of the primary attack.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the route's total length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`1.15`	Arrowhead total width as a ratio of its length
`labelPosition`	Label position	number	advanced	appearance	`0.5`	Position of the T/W/W1 group along the route, from tail (0) to tip (1)
`labelPadding`	Label padding	number	advanced	appearance	`0`	Extra spacing between the route and the date-time rows, in label heights
`arrowheadOutlineRatio`	Arrowhead outline	number	advanced	appearance	`0.3`	Outlined arrowhead thickness as a ratio of its length

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the attack route's unique designation.
`W`	Start date-time group	Field W — the route's start date-time group.
`W1`	End date-time group	Field W1 — the route's end date-time group.

Label placement on a representative shape

Direction of Supporting Attack

140603direction-of-supporting-attackline2+ points

The direction or route of an attack that supports the main effort.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the route's total length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`1.15`	Arrowhead total width as a ratio of its length
`labelPosition`	Label position	number	advanced	appearance	`0.5`	Position of the T/W/W1 group along the route, from tail (0) to tip (1)
`labelPadding`	Label padding	number	advanced	appearance	`0`	Extra spacing between the route and the date-time rows, in label heights

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the attack route's unique designation.
`W`	Start date-time group	Field W — the route's start date-time group.
`W1`	End date-time group	Field W1 — the route's end date-time group.

Label placement on a representative shape

Final coordination line

140700final-coordination-lineline2+ points

A line close to the enemy position used to coordinate the lifting or shifting of supporting fires with the final deployment of maneuver elements.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`phaseLineName`	Phase line name	text	primary	doctrinal	—	Name the line as a phase line — rendered "PL <name>" beyond each end of the line.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the phase line name with "PL" (or show the bare name).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Infiltration Lane

140800infiltration-laneline3+ points

A control measure that coordinates forward and lateral movement of infiltrating units and fixes fire planning responsibilities.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the infiltration lane's unique designation.

Label placement on a representative shape

Limit of advance

140900limit-of-advanceline2+ points

An easily recognized terrain feature beyond which attacking elements will not advance.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`phaseLineName`	Phase line name	text	primary	doctrinal	—	Name the line as a phase line — rendered "PL <name>" beyond each end of the line.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the phase line name with "PL" (or show the bare name).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Line of departure

141000line-of-departureline2+ points

A line designated to coordinate the departure of attacking elements.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`phaseLineName`	Phase line name	text	primary	doctrinal	—	Name the line as a phase line — rendered "PL <name>" beyond each end of the line.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the phase line name with "PL" (or show the bare name).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Line of departure / line of contact

141100line-of-departure-contactline2+ points

The designation of forward friendly positions as the line of departure when opposing forces are in contact.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`phaseLineName`	Phase line name	text	primary	doctrinal	—	Name the line as a phase line — rendered "PL <name>" beyond each end of the line.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the phase line name with "PL" (or show the bare name).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Probable line of deployment

141200probable-line-of-deploymentline2+ points

A line selected on the ground, usually the last covered and concealed position prior to the objective and forward of the line of departure, where attacking units deploy prior to beginning an assault.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`phaseLineName`	Phase line name	text	primary	doctrinal	—	Name the line as a phase line — rendered "PL <name>" beyond each end of the line.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the phase line name with "PL" (or show the bare name).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Airhead line

141300airhead-linearea3+ points

A line denoting the limits of the objective area for an airborne assault.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Bridgehead line

141400bridgehead-lineline2+ points

The planned, temporary limit of the objective area in the development of a bridgehead.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`phaseLineName`	Phase line name	text	primary	doctrinal	—	Name the line as a phase line — rendered "PL <name>" beyond each end of the line.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the phase line name with "PL" (or show the bare name).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance between the line and its labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Holding line

141500holding-lineline2+ points

In retrograde river-crossing operations, the outer limit of the area established between the enemy and the water obstacle to preclude direct and observed indirect fires into the crossings.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`phaseLineName`	Phase line name	text	primary	doctrinal	—	Name the line as a phase line — rendered "PL <name>" beyond each end of the line.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the phase line name with "PL" (or show the bare name).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance between the line and its labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Release line

141600release-lineline2+ points

A phase line used in river-crossing operations that delineates a change in the headquarters controlling movement.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`phaseLineName`	Phase line name	text	primary	doctrinal	—	Name the line as a phase line — rendered "PL <name>" beyond each end of the line.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the phase line name with "PL" (or show the bare name).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance between the line and its labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Ambush

141700ambushline3 points

A variation of attack from concealed positions against a moving or temporarily halted enemy.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.15`	Arrowhead length as a ratio of the chord span
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.5`	Arrowhead base width as a multiple of the arrowhead length
`hatchLengthRatio`	Hatch length	number	advanced	appearance	`0.15`	Length of the parallel hatches as a fraction of the chord span
`hatchCount`	Hatch count	number	advanced	appearance	`5`	Number of parallel hatches spaced along the curve
`curveDepthRatio`	Curve depth	number	advanced	appearance	`0.25`	How far the back line bends toward the tip, as a fraction of the chord span
`arcSegments`	Arc segments	number	advanced	appearance	`30`	Number of segments used to render the curve

Handover line

141800handover-lineline2+ points

A line where responsibility for a target, area, or force transitions from one unit or headquarters to another.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`phaseLineName`	Phase line name	text	primary	doctrinal	—	Name the line as a phase line — rendered "PL <name>" beyond each end of the line.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the phase line name with "PL" (or show the bare name).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance between the line and its labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Battle handover line

141900battle-handover-lineline2+ points

A designated phase line where responsibility for combat operations transitions between two units, typically at a forward passage of lines.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`phaseLineName`	Phase line name	text	primary	doctrinal	—	Name the line as a phase line — rendered "PL <name>" beyond each end of the line.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`includePrefix`	Show PL prefix	boolean	standard	appearance	`true`	Prefix the phase line name with "PL" (or show the bare name).
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance between the line and its labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

15Maneuver Areas33

Area

150100areaarea3+ points

A generic maneuver area enclosed by a boundary.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Assembly area

150200assembly-areaarea3+ points

An area a unit occupies to prepare for further operations.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`H`	Additional information	Field H — additional free-text information, shown below the designation.
`W`	Effective from (DTG)	Field W — date-time group the area becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the area ceases to be effective.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Joint tactical action area

150501joint-tactical-action-areaarea3+ points

An area, and the airspace above it, within which land, sea, and air-based forces conduct joint tactical actions, normally against a hostile force.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`H`	Additional information	Field H — additional free-text information, shown below the designation.
`W`	Effective from (DTG)	Field W — date-time group the area becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the area ceases to be effective.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Submarine action area

150502submarine-action-areaarea3+ points

An area, including the water space and airspace above it, reserved for submarine operations.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`W`	Effective from (DTG)	Field W — date-time group the area becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the area ceases to be effective.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Submarine-generated action area

150503submarine-generated-action-areaarea3+ points

An action area generated around a submarine's reported position, reserved for its operations.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`W`	Effective from (DTG)	Field W — date-time group the area becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the area ceases to be effective.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Drop zone

150600drop-zonearea3+ points

A specified area upon which airborne troops, equipment, or supplies are airdropped.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Extraction zone

150700extraction-zonearea3+ points

A specified drop zone used for the delivery of supplies and/or equipment by means of an extraction technique from an aircraft flying very close to the ground.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Landing zone

150800landing-zonearea3+ points

A specified ground or water area for the landing of aircraft.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`H`	Additional information	Field H — additional free-text information, shown below the designation.
`W`	Effective from (DTG)	Field W — date-time group the area becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the area ceases to be effective.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Pickup zone

150900pickup-zonearea3+ points

A specified ground or water area used to pick up personnel or equipment by helicopter.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`H`	Additional information	Field H — additional free-text information, shown below the designation.
`W`	Effective from (DTG)	Field W — date-time group the area becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the area ceases to be effective.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Fortified Area

151000fortified-areaarea3+ points

A specified geographical locality with constructed defensive works as protection against attack.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`toothSizePixels`	Tooth size (screen)	number (px)	standard	appearance	`10`	Size of the fortified-area teeth, in pixels
`toothSize`	Tooth size (ground)	number (m)	standard	appearance	`50`	Size of the fortified-area teeth, in meters
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`H`	Additional information	Field H — additional free-text information, shown below the designation.
`W`	Effective from (DTG)	Field W — date-time group the area becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the area ceases to be effective.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Limited Access Area

151100limited-access-areaarea3+ points

An area with restricted access, identified by a back-hatch fill.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Battle Position

151200battle-positionarea3+ points

A defensive location oriented on a likely enemy avenue of approach, labeled with the echelon of the occupying unit.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`echelon`	Echelon	enum`"none""team""squad""section""platoon""company""battalion""regiment""brigade""division""corps""army""army-group""region""command"`	primary	doctrinal	`"battalion"`	Field B unit-size amplifier, drawn on the boundary.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`echelonSizePixels`	Echelon size (screen)	number (px)	standard	appearance	`16`	Echelon glyph height in screen pixels.
`echelonSize`	Echelon size (ground)	number (m)	standard	appearance	`750`	Echelon glyph height in meters.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`echelonPadding`	Echelon padding	number	advanced	appearance	`0.3`	Gap on each side of the echelon, as a ratio of its height.
`echelonPosition`	Echelon position	number	advanced	appearance	`0`	Slide the echelon along the boundary, as a fraction of the perimeter from the bottom edge.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the unit's designation, centered in the area.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Battle Position Prepared (P) but not Occupied

151202battle-position-preparedarea3+ points

A battle position that has been prepared for occupation but is not yet occupied, drawn with a dashed boundary and a (P)-prefixed designation.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`echelon`	Echelon	enum`"none""team""squad""section""platoon""company""battalion""regiment""brigade""division""corps""army""army-group""region""command"`	primary	doctrinal	`"battalion"`	Field B unit-size amplifier, drawn on the boundary.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`echelonSizePixels`	Echelon size (screen)	number (px)	standard	appearance	`16`	Echelon glyph height in screen pixels.
`echelonSize`	Echelon size (ground)	number (m)	standard	appearance	`750`	Echelon glyph height in meters.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`echelonPadding`	Echelon padding	number	advanced	appearance	`0.3`	Gap on each side of the echelon, as a ratio of its height.
`echelonPosition`	Echelon position	number	advanced	appearance	`0`	Slide the echelon along the boundary, as a fraction of the perimeter from the bottom edge.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the unit's designation, centered in the area.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Strong Point

151203strong-pointarea3+ points

A key point in a defensive position, usually strongly fortified and heavily armed, around which other positions are grouped for its protection.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`echelon`	Echelon	enum`"none""team""squad""section""platoon""company""battalion""regiment""brigade""division""corps""army""army-group""region""command"`	primary	doctrinal	`"battalion"`	Field B unit-size amplifier, drawn on the boundary.
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`echelonSizePixels`	Echelon size (screen)	number (px)	standard	appearance	`16`	Echelon glyph height in screen pixels.
`echelonSize`	Echelon size (ground)	number (m)	standard	appearance	`750`	Echelon glyph height in meters.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`echelonPadding`	Echelon padding	number	advanced	appearance	`0.3`	Gap on each side of the echelon, as a ratio of its height.
`echelonPosition`	Echelon position	number	advanced	appearance	`0`	Slide the echelon along the boundary, as a fraction of the perimeter from the bottom edge.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the unit's designation, centered in the area.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Contain

151204containarea3 points

Stops, holds, or surrounds enemy forces and prevents them from withdrawing or using them elsewhere.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`labelPadding`	Label padding	number	advanced	appearance	`0.2`	Extra clearance around C and ENY, as a ratio of label height
`resolution`	Resolution	number	advanced	appearance	`32`	Number of segments used to approximate the semicircle

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Retain

151205retainarea2 points

Ensures that a terrain feature controlled by a friendly force remains secure.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`openingAngle`	Opening	number	advanced	appearance	`30`	Angular opening on the friendly side, in degrees
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.1`	Open-arrowhead length as a ratio of the symbol radius
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.12`	Open-arrowhead base width as a ratio of the symbol radius
`labelPadding`	R padding	number	advanced	appearance	`0`	Extra boundary clearance on each side of R, as a ratio of its height

Engagement area

151300engagement-areaarea3+ points

An area where the commander intends to contain and destroy an enemy force with the massed effects of all available weapons and supporting systems.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Airborne Attack

151401airborne-attackline3+ points

Airborne or aviation axis of advance.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the corners where the shaft changes direction.
`shaftWidthRatio`	Shaft width	number	advanced	appearance	`0.6`	Arrow shaft width as a ratio of the arrowhead width
`rearWidthRatio`	Rear width	number	advanced	appearance	`0.6`	Width at the rear of the shaft as a ratio of the arrowhead width.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`5`	Number of segments approximating each rounded bend when smooth mode is enabled.

Attack Helicopter

151402attack-helicopterline3+ points

Attack helicopter axis of advance.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the corners where the shaft changes direction.
`shaftWidthRatio`	Shaft width	number	advanced	appearance	`0.6`	Arrow shaft width as a ratio of the arrowhead width
`rearWidthRatio`	Rear width	number	advanced	appearance	`0.6`	Width at the rear of the shaft as a ratio of the arrowhead width.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`5`	Number of segments approximating each rounded bend when smooth mode is enabled.
`symbolHeightRatio`	Symbol height	number	advanced	appearance	`0.45`	Height of the helicopter symbol as a ratio of the head width.
`triangleSizeRatio`	Triangle size	number	advanced	appearance	`0.25`	Size of the top triangle relative to the reference unit.
`bottomBarWidthRatio`	Bottom bar width	number	advanced	appearance	`1.5`	Width of the bottom bar relative to the reference triangle.
`bowTieWidthRatio`	Bowtie width	number	advanced	appearance	`0.8`	Size of the central bowtie relative to the reference triangle.

Main Attack

151403main-attackline3+ points

Receives the preponderance of available combat power to accomplish the operation's primary purpose.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the corners where the shaft changes direction.
`shaftWidthRatio`	Shaft width	number	advanced	appearance	`0.6`	Arrow shaft width as a ratio of the arrowhead width
`rearWidthRatio`	Rear width	number	advanced	appearance	`0.6`	Width at the rear of the shaft as a ratio of the arrowhead width.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`5`	Number of segments approximating each rounded bend when smooth mode is enabled.
`labelPosition`	Designation position	number	advanced	appearance	`0.25`	Position of Field T along the shaft, from tail (0) to head (1)
`dtgPosition`	Date-time position	number	advanced	appearance	`0.62`	Position of Fields W/W1 along the shaft, from tail (0) to head (1)
`labelPadding`	Label padding	number	advanced	appearance	`0`	Extra spacing between the W and W1 rows, in label heights

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the maneuver's unique designation.
`W`	Start date-time group	Field W — the maneuver's start date-time group.
`W1`	End date-time group	Field W1 — the maneuver's end date-time group.

Label placement on a representative shape

Supporting Attack

151404supporting-attackline3+ points

Supports the main attack by fixing, deceiving, or preventing enemy forces from interfering with it.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the corners where the shaft changes direction.
`shaftWidthRatio`	Shaft width	number	advanced	appearance	`0.6`	Arrow shaft width as a ratio of the arrowhead width
`rearWidthRatio`	Rear width	number	advanced	appearance	`0.6`	Width at the rear of the shaft as a ratio of the arrowhead width.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`5`	Number of segments approximating each rounded bend when smooth mode is enabled.
`labelPosition`	Designation position	number	advanced	appearance	`0.25`	Position of Field T along the shaft, from tail (0) to head (1)
`dtgPosition`	Date-time position	number	advanced	appearance	`0.62`	Position of Fields W/W1 along the shaft, from tail (0) to head (1)
`labelPadding`	Label padding	number	advanced	appearance	`0`	Extra spacing between the W and W1 rows, in label heights

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the maneuver's unique designation.
`W`	Start date-time group	Field W — the maneuver's start date-time group.
`W1`	End date-time group	Field W1 — the maneuver's end date-time group.

Label placement on a representative shape

Assault position

151500assault-positionarea3+ points

That position between the line of departure and the objective in an attack from which forces assault the objective. Ideally, it is the last covered and concealed position before reaching the objective.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Attack position

151600attack-positionarea3+ points

The last position occupied by the assault echelon before crossing the start line/line of departure.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Objective area

151700objective-areaarea3+ points

A defined geographical area within which is located an objective to be captured or reached by the military forces. This area is defined by competent authority for purposes of command and control.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`multilineLabel`	Multiline label	boolean	standard	appearance	—	Place the doctrinal label above Field T on separate centered lines
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Encirclement

151800encirclementarea3+ points

The loss of freedom of maneuver resulting from enemy control of all ground routes of evacuation and reinforcement.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`true`	Round the boundary by curving it through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`barbSpacingRatio`	Spacing	number	advanced	appearance	`0.4`	Spacing between barbs as a ratio of the symbol radius (smaller is denser).
`barbLengthRatio`	Barb length	number	advanced	appearance	`0.16`	Barb height as a ratio of the symbol radius (amplitude).

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Penetration box

151900penetration-boxarea3+ points

An area in which a force ruptures the enemy's defense on a narrow front to break the continuity of the defensive system.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Attack by Fire

152000attack-by-fireline3+ points

Uses direct and indirect fires to engage an enemy from a distance without closing, normally to destroy, suppress, fix, or deceive it. Unlike support by fire, it does not support another maneuvering force.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.3`	Arrowhead width as a ratio of the shaft length
`rearLineLengthRatio`	Rear line length	number	advanced	appearance	`0.3`	Length of the rear flare lines as a ratio of the head
`rearLineAngle`	Rear line angle	number	advanced	appearance	`45`	Angle of the rear flare lines, in degrees

Support By Fire

152100support-by-fireline4+ points

Engages the enemy by direct fire in support of another maneuvering force, normally to fix or suppress the enemy so it cannot effectively fire on that force.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.3`	Arrowhead width as a ratio of the shaft length
`rearLineLengthRatio`	Rear line length	number	advanced	appearance	`0.3`	Length of the rear flare lines as a ratio of the head
`rearLineAngle`	Rear line angle	number	advanced	appearance	`45`	Angle of the rear flare lines, in degrees

Search Area

152200search-areaarea3 points

Designates an area to examine systematically for specified persons, forces, materiel, or information.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the total leg length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.5`	Arrowhead base width as a multiple of the arrowhead length
`zigzagStart`	Zigzag start	number	advanced	appearance	`0.55`	Point along the leg where the zigzag begins (0-1).
`zigzagEnd`	Zigzag end	number	advanced	appearance	`0.45`	Point along the leg where the zigzag returns (0-1).
`zigzagAmplitudeRatio`	Zigzag amplitude	number	advanced	appearance	`0.07`	Perpendicular kink offset as a ratio of leg length.

Area Defense

152600area-defensearea2 points

A defensive posture oriented in all directions and focused on retaining specified terrain.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`openingAngle`	Arrow opening	number	advanced	appearance	`30`	Angular opening between the two arrow tips, in degrees
`labelOpeningAngle`	AD opening	number	advanced	appearance	`20`	Angular opening occupied by the AD label, in degrees
`barbCount`	Barbs	number	advanced	appearance	`6`	Number of filled outward barbs distributed around the defense
`barbLengthRatio`	Barb length	number	advanced	appearance	`0.16`	Barb height as a ratio of the symbol radius
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.18`	Open-arrowhead length as a ratio of the symbol radius

Frontal Attack

152700frontal-attackline3+ points

An offensive maneuver in which the main action is directed against the front.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the corners where the shaft changes direction.
`shaftWidthRatio`	Shaft width	number	advanced	appearance	`0.6`	Arrow shaft width as a ratio of the arrowhead width
`rearWidthRatio`	Rear width	number	advanced	appearance	`0.6`	Width at the rear of the shaft as a ratio of the arrowhead width.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`5`	Number of segments approximating each rounded bend when smooth mode is enabled.
`crossbarLengthRatio`	Straight line length	number	advanced	appearance	`1.1`	Crossbar length as a multiple of the arrowhead base width
`labelPosition`	Designation position	number	advanced	appearance	`0.25`	Position of Field T along the shaft, from tail (0) to head (1)
`dtgPosition`	Date-time position	number	advanced	appearance	`0.62`	Position of Fields W/W1 along the shaft, from tail (0) to head (1)
`labelPadding`	Label padding	number	advanced	appearance	`0`	Extra spacing between the W and W1 rows, in label heights

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the maneuver's unique designation.
`W`	Start date-time group	Field W — the maneuver's start date-time group.
`W1`	End date-time group	Field W1 — the maneuver's end date-time group.

Label placement on a representative shape

Mobile Defense

152800mobile-defensearea3 points

A defensive maneuver that uses terrain, fires, and maneuver to defeat an attacking enemy force.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`labelPadding`	Label padding	number	advanced	appearance	`0`	Extra clearance around MD, as a ratio of label height

Turning Movement

152900turning-movementline3+ points

A maneuver that passes around or over an enemy's principal defensive positions to secure objectives to the enemy's rear.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the corners where the shaft changes direction.
`shaftWidthRatio`	Shaft width	number	advanced	appearance	`0.6`	Arrow shaft width as a ratio of the arrowhead width
`rearWidthRatio`	Rear width	number	advanced	appearance	`0.6`	Width at the rear of the shaft as a ratio of the arrowhead width.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`5`	Number of segments approximating each rounded bend when smooth mode is enabled.
`crossbarLengthRatio`	Straight line length	number	advanced	appearance	`1.1`	Crossbar length as a multiple of the arrowhead base width
`labelPosition`	Designation position	number	advanced	appearance	`0.25`	Position of Field T along the shaft, from tail (0) to head (1)
`dtgPosition`	Date-time position	number	advanced	appearance	`0.62`	Position of Fields W/W1 along the shaft, from tail (0) to head (1)
`labelPadding`	Label padding	number	advanced	appearance	`0`	Extra spacing between the W and W1 rows, in label heights
`crossbarPosition`	Crossbar position	number	advanced	appearance	`0`	Position along the shaft, from tail (0) to arrowhead base (1)

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the maneuver's unique designation.
`W`	Start date-time group	Field W — the maneuver's start date-time group.
`W1`	End date-time group	Field W1 — the maneuver's end date-time group.

Label placement on a representative shape

20Maritime Control Areas01

Radar Search Doctrine

200700radar-search-doctrinearea3 points

A maritime radar search area defined by an axis and annular-sector limits.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`resolution`	Resolution	number	advanced	appearance	`64`	Number of segments in a full 360° sweep.

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — designation centered in the search area along its axis.

Label placement on a representative shape

24Fire Areas01

No Fire Area (NFA) – Irregular

240301no-fire-area-irregulararea3+ points

An irregular area into which fires or their effects are prohibited.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	`0.7`	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the no-fire area's unique designation.
`W`	Effective from (DTG)	Field W — date-time group the no-fire area becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the no-fire area ceases to be effective.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

27Protection Areas15

Obstacle Belt

270100obstacle-beltarea3+ points

A brigade-level control measure within an obstacle zone that limits friendly obstacle employment and focuses the defense.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`toothSize`	Tooth size (ground)	number (m)	standard	appearance	`50`	Boundary tooth height in meters
`toothSizePixels`	Tooth size (screen)	number (px)	standard	appearance	`10`	Boundary tooth height in pixels
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Obstacle Zone

270200obstacle-zonearea3+ points

A division-level control measure designating land areas where subordinate units are authorized to employ tactical obstacles.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`toothSize`	Tooth size (ground)	number (m)	standard	appearance	`50`	Boundary tooth height in meters
`toothSizePixels`	Tooth size (screen)	number (px)	standard	appearance	`10`	Boundary tooth height in pixels
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Obstacle Free Zone

270300obstacle-free-zonearea3+ points

An area designated to remain completely free of reinforcing obstacles.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`toothSize`	Tooth size (ground)	number (m)	standard	appearance	`50`	Boundary tooth height in meters
`toothSizePixels`	Tooth size (screen)	number (px)	standard	appearance	`10`	Boundary tooth height in pixels
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`W`	Effective from (DTG)	Field W — date-time group the area becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the area ceases to be effective.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Obstacle Restricted Zone

270400obstacle-restricted-zonearea3+ points

A control measure limiting the types or number of obstacles permitted within an area.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`toothSize`	Tooth size (ground)	number (m)	standard	appearance	`50`	Boundary tooth height in meters
`toothSizePixels`	Tooth size (screen)	number (px)	standard	appearance	`10`	Boundary tooth height in pixels
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the area's unique designation.
`W`	Effective from (DTG)	Field W — date-time group the area becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the area ceases to be effective.
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Block

270501blockline2+ points

Integrates fires and obstacles to stop an attacker along an avenue of approach or prevent it from passing through an engagement area. Establishes a limit of enemy advance.

No parameters — shape is fully determined by its points.

Disrupt

270502disruptline2+ points

Integrates fires and obstacles to break up an enemy's formation and tempo, interrupt its timetable, commit breaching assets prematurely, and force a piecemeal attack.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`middleArrowLengthRatio`	Middle arrow length	number	advanced	appearance	`0.65`	Middle arrow length as a ratio of the longest (top) arrow.
`bottomArrowLengthRatio`	Bottom arrow length	number	advanced	appearance	`0.45`	Bottom arrow length as a ratio of the longest (top) arrow.
`shaftLengthRatio`	Shaft length	number	advanced	appearance	`0.65`	Center shaft length as a ratio of the longest arrow, extending opposite.
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.2`	Arrowhead length as a ratio of the longest arrow
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.2`	Arrowhead base width as a ratio of the longest arrow

Fix

270503fixline2 points

Slows an attacker within a specified area, giving friendly forces time to acquire, target, and destroy it throughout the area's depth.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadAngle`	Arrowhead angle	number	advanced	appearance	`35`	Half-angle of the open arrowhead wings, in degrees.
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.16`	Arrowhead length as a ratio of the axis length
`endSegmentRatio`	End segment	number	advanced	appearance	`0.2`	Flat end segment length as a ratio of the axis (capped at 0.35).

Turn

270504turnline2+ points

Diverts an enemy formation from one avenue of approach to another or into an engagement area. The arrow indicates the desired direction of turn.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.16`	Arrowhead length as a ratio of the rear-to-tip distance
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.16`	Arrowhead base width as a ratio of the rear-to-tip distance
`arcSegments`	Arc segments	number	advanced	appearance	`64`	Number of line segments approximating the quarter-circle shaft.

Obstacle Bypass Easy

270601obstacle-bypass-easyline2+ points

Obstacle bypass (easy) with parallel rails and two arrowheads.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.2`	Arrowhead length as a ratio of the opening width
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.2`	Arrowhead base width as a ratio of the opening width
`defaultLengthRatio`	Default length	number	advanced	appearance	`1.5`	Symbol depth as a ratio of opening width when no hint point is given

Obstacle Bypass Difficult

270602obstacle-bypass-difficultline2+ points

Obstacle bypass (difficult) with zigzag rear line and arrowheads.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.2`	Arrowhead length as a ratio of the opening width
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.2`	Arrowhead base width as a ratio of the opening width
`defaultLengthRatio`	Default length	number	advanced	appearance	`1.5`	Symbol depth as a ratio of opening width when no hint point is given
`zigzagAmplitudeRatio`	Zigzag amplitude	number	advanced	appearance	`0.12`	Zigzag tooth depth as a ratio of the opening width.
`zigzagSpacingRatio`	Zigzag spacing	number	advanced	appearance	`0.18`	Spacing between zigzag teeth as a ratio of the opening width.

Obstacle Bypass Impossible

270603obstacle-bypass-impossibleline2+ points

Obstacle bypass (impossible) with rear barrier marks and arrowheads.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.2`	Arrowhead length as a ratio of the opening width
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.2`	Arrowhead base width as a ratio of the opening width
`defaultLengthRatio`	Default length	number	advanced	appearance	`1.5`	Symbol depth as a ratio of opening width when no hint point is given
`rearBarLengthRatio`	Rear bar length	number	advanced	appearance	`0.12`	Length of each rear barrier bar as a ratio of the opening width.
`rearGapRatio`	Rear gap	number	advanced	appearance	`0.08`	Gap between the two rear bars as a ratio of the opening width.

Minefield

270701minefieldpoint1 point

A static point symbol identifying a minefield and its mine type.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`mineType`	Mine type	enum`"unspecified""antipersonnel""antipersonnel-directional""antitank""antitank-antihandling""wide-area-antitank""mine-cluster"`	primary	doctrinal	`"unspecified"`	Modifier 1 (symbol set 25 values 13–19).
`sizeMeters`	Size (ground)	number (m)	standard	appearance	—	Overall width of the static symbol.
`rotation`	Rotation	number (°)	standard	appearance	`0`	Clockwise rotation of the static symbol.

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the minefield's west and east sides.
`H`	Additional information	Field H — additional information shown above the minefield.
`W`	Date-time group	Field W — date-time group shown below the minefield.

Label placement on a representative shape

Minefield (Dynamic)

270707minefield-dynamicarea3+ points

A free-area minefield filled with the selected Modifier 1 mine pictogram.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`mineType`	Mine type	enum`"unspecified""antipersonnel""antipersonnel-directional""antitank""antitank-antihandling""wide-area-antitank""mine-cluster"`	primary	doctrinal	`"unspecified"`	Modifier 1 (symbol set 25 values 13–19).
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Mined Area

270800mined-areaarea3+ points

An area dangerous because of the presence or suspected presence of mines.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`mineType`	Mine type	enum`"unspecified""antipersonnel""antipersonnel-directional""antitank""antitank-antihandling""wide-area-antitank""mine-cluster"`	primary	doctrinal	`"unspecified"`	Modifier 1 (symbol set 25 values 13–19).
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the area's corners by curving the boundary through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra spacing between or around the area's labels, as a ratio of label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker at the area's west and east edges.

Label placement on a representative shape

Bridge or Gap

271100bridge-or-gapline4 points

An area within a minefield or obstacle belt, free of live mines or obstacles, whose width and direction allow a friendly force to pass through in tactical formation.

No parameters — shape is fully determined by its points.

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the bridge or gap's unique designation.
`W`	Effective from (DTG)	Field W — date-time group the bridge or gap becomes effective.
`W1`	Effective to (DTG)	Field W1 — date-time group the bridge or gap ceases to be effective.

Label placement on a representative shape

29Protection Lines13

Ditch - Under Construction

290201antitank-ditch-under-constructionline2+ points

Antitank ditch obstacle under construction.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`toothHeightPixels`	Tooth height (screen)	number (px)	standard	appearance	`10`	Perpendicular depth of each triangular tooth
`toothHeight`	Tooth height (ground)	number (m)	standard	appearance	`50`	Perpendicular depth of each triangular tooth
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`toothWidthRatio`	Tooth width ratio	number (x)	advanced	appearance	`1.15`	Tooth base span as a multiple of height
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Ditch - Completed

290202antitank-ditch-completedline2+ points

Completed antitank ditch obstacle.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`toothHeightPixels`	Tooth height (screen)	number (px)	standard	appearance	`10`	Perpendicular depth of each triangular tooth
`toothHeight`	Tooth height (ground)	number (m)	standard	appearance	`50`	Perpendicular depth of each triangular tooth
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`toothWidthRatio`	Tooth width ratio	number (x)	advanced	appearance	`1.15`	Tooth base span as a multiple of height
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Antitank Wall

290204antitank-wallline2+ points

Antitank wall obstacle.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`toothHeightPixels`	Tooth height (screen)	number (px)	standard	appearance	`10`	Perpendicular depth of each triangular tooth
`toothHeight`	Tooth height (ground)	number (m)	standard	appearance	`50`	Perpendicular depth of each triangular tooth
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`toothWidthRatio`	Tooth width ratio	number (x)	advanced	appearance	`2.2`	Tooth base span as a multiple of height
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height
`toothSpacingRatio`	Tooth spacing ratio	number (x)	advanced	appearance	`1.35`	Gap between teeth as a multiple of base width

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Wire Obstacles – Unspecified

290301wire-obstacle-unspecifiedline2+ points

A wire obstacle whose fence type is unspecified.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`markerSize`	Marker size (ground)	number (m)	standard	appearance	`100`	Full height of each wire marker in meters
`markerSizePixels`	Marker size (screen)	number (px)	standard	appearance	`20`	Full height of each wire marker in pixels
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`markerSpacingRatio`	Marker spacing	number	advanced	appearance	`1.5`	Target distance between marker groups as a multiple of marker height
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Single Fence

290302single-fenceline2+ points

A wire obstacle consisting of a single fence.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`markerSize`	Marker size (ground)	number (m)	standard	appearance	`100`	Full height of each wire marker in meters
`markerSizePixels`	Marker size (screen)	number (px)	standard	appearance	`20`	Full height of each wire marker in pixels
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`markerSpacingRatio`	Marker spacing	number	advanced	appearance	`3`	Target distance between marker groups as a multiple of marker height
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Double Fence

290303double-fenceline2+ points

A wire obstacle consisting of a double fence.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`markerSize`	Marker size (ground)	number (m)	standard	appearance	`100`	Full height of each wire marker in meters
`markerSizePixels`	Marker size (screen)	number (px)	standard	appearance	`20`	Full height of each wire marker in pixels
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`markerSpacingRatio`	Marker spacing	number	advanced	appearance	`3.6`	Target distance between marker groups as a multiple of marker height
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Double Apron Fence

290304double-apron-fenceline2+ points

A wire fence with an apron on each side.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`markerSize`	Marker size (ground)	number (m)	standard	appearance	`100`	Full height of each wire marker in meters
`markerSizePixels`	Marker size (screen)	number (px)	standard	appearance	`20`	Full height of each wire marker in pixels
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`markerSpacingRatio`	Marker spacing	number	advanced	appearance	`1.5`	Target distance between marker groups as a multiple of marker height
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Low Wire Fence

290305low-wire-fenceline2+ points

A low wire fence obstacle.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`markerSize`	Marker size (ground)	number (m)	standard	appearance	`100`	Full height of each wire marker in meters
`markerSizePixels`	Marker size (screen)	number (px)	standard	appearance	`20`	Full height of each wire marker in pixels
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`markerSpacingRatio`	Marker spacing	number	advanced	appearance	`1.5`	Target distance between marker groups as a multiple of marker height
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

High Wire Fence

290306high-wire-fenceline2+ points

A high wire fence obstacle.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`markerSize`	Marker size (ground)	number (m)	standard	appearance	`100`	Full height of each wire marker in meters
`markerSizePixels`	Marker size (screen)	number (px)	standard	appearance	`20`	Full height of each wire marker in pixels
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`markerSpacingRatio`	Marker spacing	number	advanced	appearance	`1.5`	Target distance between marker groups as a multiple of marker height
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Single Concertina

290307single-concertinaline2+ points

A wire obstacle consisting of a single concertina coil.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`markerSize`	Marker size (ground)	number (m)	standard	appearance	`100`	Full height of each wire marker in meters
`markerSizePixels`	Marker size (screen)	number (px)	standard	appearance	`20`	Full height of each wire marker in pixels
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`resolution`	Resolution	number	advanced	appearance	`64`	Number of segments in a full 360° sweep.
`markerSpacingRatio`	Marker spacing	number	advanced	appearance	`1.25`	Target distance between marker groups as a multiple of marker height
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Double Strand Concertina

290308double-strand-concertinaline2+ points

A wire obstacle consisting of double-strand concertina.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`markerSize`	Marker size (ground)	number (m)	standard	appearance	`100`	Full height of each wire marker in meters
`markerSizePixels`	Marker size (screen)	number (px)	standard	appearance	`20`	Full height of each wire marker in pixels
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`resolution`	Resolution	number	advanced	appearance	`64`	Number of segments in a full 360° sweep.
`markerSpacingRatio`	Marker spacing	number	advanced	appearance	`1.25`	Target distance between marker groups as a multiple of marker height
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Triple Strand Concertina

290309triple-strand-concertinaline2+ points

A wire obstacle consisting of triple-strand concertina.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`markerSize`	Marker size (ground)	number (m)	standard	appearance	`100`	Full height of each wire marker in meters
`markerSizePixels`	Marker size (screen)	number (px)	standard	appearance	`20`	Full height of each wire marker in pixels
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`resolution`	Resolution	number	advanced	appearance	`64`	Number of segments in a full 360° sweep.
`markerSpacingRatio`	Marker spacing	number	advanced	appearance	`1.25`	Target distance between marker groups as a multiple of marker height
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

Fortified Line

290900fortified-lineline2+ points

Fortified line with castellated square-wave boundary.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the line's corners by curving the path through the control points.
`toothSizePixels`	Tooth size (screen)	number (px)	standard	appearance	`10`	Side length of the square crenellations
`toothSize`	Tooth size (ground)	number (m)	standard	appearance	`50`	Side length of the square crenellations
`smoothResolution`	Smooth resolution	number	advanced	appearance	`16`	Number of samples per segment when smooth mode is enabled.
`labelPadding`	Label padding	number	advanced	appearance	—	Extra clearance around labels, as a ratio of the label height

Text amplifiers

Field	Label	Description
`N`	Hostile (ENY) marker	Field N — literal "ENY" marker beyond both ends of the line.

Label placement on a representative shape

34Mission Tasks41

Block

340100block-mission-taskline2+ points

Denies the enemy access to an area or avenue of approach, normally for a specified time or until a specified event occurs. The enemy may still move in other directions.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height

Breach

340200breachline3 points

Breaks through or establishes a passage through enemy defenses, obstacles, minefields, or fortifications using synchronized combined arms.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`tickLengthRatio`	Tick length	number	advanced	appearance	`0.15`	Length of the outward end ticks, as a ratio of the front opening width
`tickAngle`	Tick angle	number	advanced	appearance	`45`	Outward lean of the end ticks from perpendicular, in degrees
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height

Bypass

340300bypassline3 points

Deliberately avoids contact with an obstacle or enemy force to maintain momentum and avoid unnecessary combat.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the front opening width
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height

Canalize

340400canalizeline3 points

Restricts enemy movement to a narrow zone using terrain, obstacles, fires, or friendly maneuver, making the enemy vulnerable to piecemeal destruction.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`tickLengthRatio`	Tick length	number	advanced	appearance	`0.15`	Length of the inward end ticks, as a ratio of the front opening width
`tickAngle`	Tick angle	number	advanced	appearance	`45`	Inward lean of the end ticks from perpendicular, in degrees
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height

Clear

340500clearline3 points

Eliminates all enemy forces within an assigned area by destroying, capturing, or forcing their withdrawal so they cannot offer organized resistance.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowInsetRatio`	Arrow padding	number	advanced	appearance	`0.15`	Padding between the line endpoints and the outer arrows, as a ratio of height
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.15`	Arrowhead length as a ratio of the symbol height
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.2`	Arrowhead base width as a ratio of the symbol height
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height

Counterattack

340600counterattackline3+ points

Strikes an attacking enemy force with defending forces to deny its objectives and regain the initiative.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the corners where the shaft changes direction.
`shaftWidthRatio`	Shaft width	number	advanced	appearance	`0.6`	Arrow shaft width as a ratio of the arrowhead width
`rearWidthRatio`	Rear width	number	advanced	appearance	`0.6`	Width at the rear of the shaft as a ratio of the arrowhead width.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`5`	Number of segments approximating each rounded bend when smooth mode is enabled.
`labelPosition`	Label position	number	advanced	appearance	`1`	Position of the CATK label along the shaft, from tail (0) to head (1)

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the counterattack's unique designation.

Label placement on a representative shape

Counterattack by Fire

340700counterattack-by-fireline3+ points

Uses primarily direct and indirect fires against an attacking enemy force to defeat or destroy it, restore a position, or block a penetration.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the corners where the shaft changes direction.
`shaftWidthRatio`	Shaft width	number	advanced	appearance	`0.6`	Arrow shaft width as a ratio of the arrowhead width
`rearWidthRatio`	Rear width	number	advanced	appearance	`0.6`	Width at the rear of the shaft as a ratio of the arrowhead width.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`5`	Number of segments approximating each rounded bend when smooth mode is enabled.
`labelPosition`	Label position	number	advanced	appearance	`1`	Position of the CATK label along the shaft, from tail (0) to head (1)

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the counterattack's unique designation.

Label placement on a representative shape

Delay

340800delayline3 points

Trades space for time while under pressure, slowing the enemy's momentum and inflicting maximum damage without becoming decisively engaged.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the straight-line length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.12`	Arrowhead base width as a ratio of the straight-line length
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height
`arcSegments`	Arc segments	number	advanced	appearance	`32`	Number of straight segments used to approximate the semicircular arc

Destroy

340900destroypoint1 point

Renders an enemy force or capability physically combat-ineffective until reconstituted.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`sizePixels`	Size (screen)	number (px)	standard	appearance	`80`	Width of the complete symbol in screen pixels.
`sizeMeters`	Size (ground)	number (m)	standard	appearance	—	Overall width of the static symbol.
`rotation`	Rotation	number (°)	standard	appearance	`0`	Clockwise rotation of the static symbol.
`crossAngle`	Cross angle	number (°)	advanced	appearance	`57.62158748594614`	Opening angle between the two right-hand arms. Changes height while preserving width.
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around the doctrinal letter, as a ratio of its resolved height.

Disrupt

341000disrupt-mission-taskline2–3 points

Upsets an enemy's formation or tempo and causes the enemy force to attack prematurely or in a piecemeal fashion.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`middleArrowLengthRatio`	Middle arrow length	number	advanced	appearance	`0.65`	Middle arrow length as a ratio of the PT.3-controlled top arrow
`bottomArrowLengthRatio`	Bottom arrow length	number	advanced	appearance	`0.45`	Bottom arrow length as a ratio of the PT.3-controlled top arrow
`shaftLengthRatio`	Rear shaft length	number	advanced	appearance	`0.25`	Middle shaft extension behind the spine, as a ratio of the top arrow
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.15`	Arrowhead length as a ratio of the spine length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.2`	Arrowhead base width as a ratio of the spine length
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height

Fix

341100fix-mission-taskline2 points

Prevents an enemy force from moving from a specific location for a specified period of time.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.11`	Arrowhead length as a ratio of the axis length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.18`	Arrowhead base width as a ratio of the axis length
`zigzagStartRatio`	Zigzag start	number	advanced	appearance	`0.18`	Position where the zigzag begins, measured from PT2
`zigzagEndRatio`	Zigzag end	number	advanced	appearance	`0.8`	Position where the zigzag ends, measured from PT2
`zigzagPeakCount`	Zigzag peaks	number	advanced	appearance	`5`	Number of upward peaks in the zigzag body
`labelPositionRatio`	Label position	number	advanced	appearance	`0.09`	Position of the F label along the axis, measured from PT2
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height

Follow and Assume

341200follow-and-assumeline2 points

Follows and supports a lead force during an offensive operation and continues the mission if the lead force cannot continue.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadSize`	Arrowhead size	number	advanced	appearance	`1`	Arrowhead scale relative to its default size; the tip stays at point 1.

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — optional unique designation inside the rear shape.

Label placement on a representative shape

Follow and Support

341300follow-and-supportline2 points

Follows and supports a lead force during an offensive operation, taking on tasks that would otherwise slow the lead force’s advance.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadSize`	Arrowhead size	number	advanced	appearance	`1`	Arrowhead scale relative to its default size; the tip stays at point 1.

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — optional unique designation inside the rear shape.

Label placement on a representative shape

Isolate

341500isolateline2 points

Seals an enemy off physically and psychologically from sources of support, denies freedom of movement, and prevents contact with other enemy forces.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`openingAngle`	Opening	number	advanced	appearance	`30`	Angular width of the gap on the friendly side, in degrees
`barbCount`	Barbs	number	advanced	appearance	`9`	Number of inward-pointing barbs spaced along the closed arc
`barbLengthRatio`	Barb length	number	advanced	appearance	`0.18`	Length of each inward barb, as a ratio of the symbol radius
`labelPadding`	I padding	number	advanced	appearance	`0.2`	Extra boundary clearance on each side of I, as a ratio of its height

Neutralize

341600neutralizepoint1 point

Renders enemy personnel or materiel incapable of interfering with an operation.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`sizePixels`	Size (screen)	number (px)	standard	appearance	`80`	Width of the complete symbol in screen pixels.
`sizeMeters`	Size (ground)	number (m)	standard	appearance	—	Overall width of the static symbol.
`rotation`	Rotation	number (°)	standard	appearance	`0`	Clockwise rotation of the static symbol.
`crossAngle`	Cross angle	number (°)	advanced	appearance	`57.62158748594614`	Opening angle between the two right-hand arms. Changes height while preserving width.
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around the doctrinal letter, as a ratio of its resolved height.

Occupy

341700occupyarea2 points

Moves into and controls an area without enemy opposition.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`openingAngle`	Opening	number	advanced	appearance	`30`	Angular width of the opening on the friendly side, in degrees
`resolution`	Resolution	number	advanced	appearance	`64`	Number of segments in a full 360° sweep.
`xSizeRatio`	X size	number	advanced	appearance	`0.2`	Overall size of the terminal X as a ratio of the symbol radius
`xAspectRatio`	X aspect ratio	number	advanced	appearance	`1.5`	Width-to-height ratio of the terminal X
`labelPadding`	O padding	number	advanced	appearance	`0.2`	Extra boundary clearance on each side of O, as a ratio of its height

Penetrate

341800penetrateline3 points

Attacks on a narrow front to break the continuity of an enemy defense and enable the isolation and defeat of enemy forces in detail.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.15`	Arrowhead length as a ratio of the barrier length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.2`	Arrowhead base width as a ratio of the barrier length
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height

Relief in Place

341900relief-in-placeline4 points

Replaces all or part of a unit in an area and transfers responsibility for its mission and assigned area to the incoming unit.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the straight-line length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.12`	Arrowhead base width as a ratio of the straight-line length
`arcSegments`	Arc segments	number	advanced	appearance	`32`	Number of straight segments used to approximate the semicircular arc

Retire/Retirement

342000retireline3 points

Moves a force out of contact away from the enemy.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the straight-line length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.12`	Arrowhead base width as a ratio of the straight-line length
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height
`arcSegments`	Arc segments	number	advanced	appearance	`32`	Number of straight segments used to approximate the semicircular arc

Secure

342100securearea2 points

Prevents a unit, facility, or geographical location from being damaged or destroyed by enemy action.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`openingAngle`	Opening	number	advanced	appearance	`30`	Angular width of the opening on the friendly side, in degrees
`resolution`	Resolution	number	advanced	appearance	`64`	Number of segments in a full 360° sweep.
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.2`	Arrowhead length as a ratio of the symbol radius
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.4`	Arrowhead width as a ratio of the symbol radius
`labelPadding`	S padding	number	advanced	appearance	`0.2`	Extra boundary clearance on each side of S, as a ratio of its height

Cover

342201coverline4 points

Protects the main body by fighting to gain time and preventing enemy ground observation and direct fire. Operates independently of the main body.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the total leg length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.5`	Arrowhead base width as a multiple of the arrowhead length
`zigzagStart`	Zigzag start	number	advanced	appearance	`0.55`	Point along the leg where the zigzag begins (0-1).
`zigzagEnd`	Zigzag end	number	advanced	appearance	`0.45`	Point along the leg where the zigzag returns (0-1).
`zigzagAmplitudeRatio`	Zigzag amplitude	number	advanced	appearance	`0.07`	Perpendicular kink offset as a ratio of leg length.
`labelInsetRatio`	Letter position	number	advanced	appearance	`0.2`	Inset of each task letter from PT. 2 or PT. 3 across the center opening

Guard

342202guardline4 points

Protects the main body by fighting to gain time and preventing enemy ground observation and direct fire. Operates within range of the main body’s supporting fires.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the total leg length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.5`	Arrowhead base width as a multiple of the arrowhead length
`zigzagStart`	Zigzag start	number	advanced	appearance	`0.55`	Point along the leg where the zigzag begins (0-1).
`zigzagEnd`	Zigzag end	number	advanced	appearance	`0.45`	Point along the leg where the zigzag returns (0-1).
`zigzagAmplitudeRatio`	Zigzag amplitude	number	advanced	appearance	`0.07`	Perpendicular kink offset as a ratio of leg length.
`labelInsetRatio`	Letter position	number	advanced	appearance	`0.2`	Inset of each task letter from PT. 2 or PT. 3 across the center opening

Screen

342203screenline4 points

Provides early warning to the protected force through observation, identification, reporting, and continuous surveillance of the enemy.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the total leg length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.5`	Arrowhead base width as a multiple of the arrowhead length
`zigzagStart`	Zigzag start	number	advanced	appearance	`0.55`	Point along the leg where the zigzag begins (0-1).
`zigzagEnd`	Zigzag end	number	advanced	appearance	`0.45`	Point along the leg where the zigzag returns (0-1).
`zigzagAmplitudeRatio`	Zigzag amplitude	number	advanced	appearance	`0.07`	Perpendicular kink offset as a ratio of leg length.
`labelInsetRatio`	Letter position	number	advanced	appearance	`0.2`	Inset of each task letter from PT. 2 or PT. 3 across the center opening

Seize

342300seizeline4 points

Takes possession of a designated area using overwhelming force, overcoming enemy opposition and preventing enemy direct fire on the objective.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.1`	Arrowhead length as a ratio of the PT. 2-to-PT. 4 span
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.12`	Arrowhead base width as a ratio of the PT. 2-to-PT. 4 span
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height
`curveSegments`	Curve segments	number	advanced	appearance	`48`	Number of straight segments used to approximate the circular arc
`circleSegments`	Circle segments	number	advanced	appearance	`64`	Number of straight segments used to approximate the assigned-unit circle

Withdraw

342400withdrawline3 points

Disengages a force from the enemy and moves it away from enemy contact.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the straight-line length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.12`	Arrowhead base width as a ratio of the straight-line length
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height
`arcSegments`	Arc segments	number	advanced	appearance	`32`	Number of straight segments used to approximate the semicircular arc

Withdraw Under Pressure

342500withdraw-under-pressureline3 points

Disengages a force from the enemy and moves it away while under enemy pressure.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the straight-line length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.12`	Arrowhead base width as a ratio of the straight-line length
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height
`arcSegments`	Arc segments	number	advanced	appearance	`32`	Number of straight segments used to approximate the semicircular arc

Cordon and Knock

342600cordon-and-knockline2 points

Isolates a target area and requests or demands access before searching it.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`openingAngle`	Opening	number	advanced	appearance	`30`	Angular width of the gap on the friendly side, in degrees
`barbCount`	Barbs	number	advanced	appearance	`9`	Number of inward-pointing barbs spaced along the closed arc
`barbLengthRatio`	Barb length	number	advanced	appearance	`0.18`	Length of each inward barb, as a ratio of the symbol radius
`labelPadding`	C/K padding	number	advanced	appearance	`0.2`	Extra boundary clearance on each side of C/K, as a ratio of its height

Cordon and Search

342700cordon-and-searchline2 points

Isolates and searches a target area to capture or destroy enemy forces and contraband.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`openingAngle`	Opening	number	advanced	appearance	`30`	Angular width of the gap on the friendly side, in degrees
`barbCount`	Barbs	number	advanced	appearance	`9`	Number of inward-pointing barbs spaced along the closed arc
`barbLengthRatio`	Barb length	number	advanced	appearance	`0.18`	Length of each inward barb, as a ratio of the symbol radius
`labelPadding`	C/S padding	number	advanced	appearance	`0.2`	Extra boundary clearance on each side of C/S, as a ratio of its height

Suppress

342800suppresspoint1 point

Temporarily degrades an enemy force or weapon system below the level needed to accomplish its mission.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`sizePixels`	Size (screen)	number (px)	standard	appearance	`80`	Width of the complete symbol in screen pixels.
`sizeMeters`	Size (ground)	number (m)	standard	appearance	—	Overall width of the static symbol.
`rotation`	Rotation	number (°)	standard	appearance	`0`	Clockwise rotation of the static symbol.
`crossAngle`	Cross angle	number (°)	advanced	appearance	`57.62158748594614`	Opening angle between the two right-hand arms. Changes height while preserving width.
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around the doctrinal letter, as a ratio of its resolved height.

Movement to Contact

342900movement-to-contactline3+ points

Develops the situation and establishes or regains contact with the enemy.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the corners where the shaft changes direction.
`shaftWidthRatio`	Shaft width	number	advanced	appearance	`0.6`	Arrow shaft width as a ratio of the arrowhead width
`rearWidthRatio`	Rear width	number	advanced	appearance	`0.6`	Width at the rear of the shaft as a ratio of the arrowhead width.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`5`	Number of segments approximating each rounded bend when smooth mode is enabled.
`boltLengthRatio`	Bolt length	number	advanced	appearance	`1`	Bolt length as a multiple of the shaft width at the arrow base (2 or more is recommended).
`boltAngle`	Bolt angle	number	advanced	appearance	`45`	Angle between each bolt and the main arrow axis, in degrees.
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the total leg length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.5`	Arrowhead base width as a multiple of the arrowhead length
`zigzagStart`	Zigzag start	number	advanced	appearance	`0.55`	Point along the leg where the zigzag begins (0-1).
`zigzagEnd`	Zigzag end	number	advanced	appearance	`0.45`	Point along the leg where the zigzag returns (0-1).
`zigzagAmplitudeRatio`	Zigzag amplitude	number	advanced	appearance	`0.07`	Perpendicular kink offset as a ratio of leg length.
`labelPosition`	Designation position	number	advanced	appearance	`0.25`	Position of Field T along the shaft, from tail (0) to head (1)
`dtgPosition`	Date-time position	number	advanced	appearance	`0.62`	Position of Fields W/W1 along the shaft, from tail (0) to head (1)
`labelPadding`	Label padding	number	advanced	appearance	`0`	Extra spacing between the W and W1 rows, in label heights

Text amplifiers

Field	Label	Description
`T`	Unique designation	Field T — the maneuver's unique designation.
`W`	Start date-time group	Field W — the maneuver's start date-time group.
`W1`	End date-time group	Field W1 — the maneuver's end date-time group.

Label placement on a representative shape

Exploit/Exploitation

343100exploitationline3 points

Follows a successful attack to disorganize the enemy in depth and capitalize on its reduced ability to react.

No parameters — shape is fully determined by its points.

Demonstrate/Demonstration

343300demonstrateline4 points

Deceives the enemy with a show of force in an area where no decision is sought, without intending direct or indirect contact.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the straight-line length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.12`	Arrowhead base width as a ratio of the straight-line length
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height
`arcSegments`	Arc segments	number	advanced	appearance	`32`	Number of straight segments used to approximate the semicircular arc

Envelopment

343500envelopmentline4 points

Avoids the enemy’s principal defenses by attacking along an assailable flank to strike the flank or rear.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.1`	Arrowhead length as a ratio of the arc diameter
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.12`	Arrowhead width as a ratio of the arc diameter
`labelPosition`	Label position	number	advanced	appearance	`0.6`	Position of the E label along the straight portion
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height
`resolution`	Resolution	number	advanced	appearance	`64`	Number of segments in a full 360° sweep.

Infiltration

343800infiltrationline3 points

Moves forces through or into an area occupied by enemy forces without detection.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.1`	Arrowhead length as a ratio of the Point 1–Point 3 span
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.1`	Arrowhead width as a ratio of the Point 1–Point 3 span
`labelPosition`	Label position	number	advanced	appearance	`0.6`	Position of the IN label along the initial straight portion
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height
`resolution`	Resolution	number	advanced	appearance	`64`	Number of segments in a full 360° sweep.

Pursuit

344000pursuitline3 points

Catches or cuts off a disorganized enemy force attempting to escape, with the aim of destroying it.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.1`	Arrowhead length as a ratio of the arc diameter
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.12`	Arrowhead width as a ratio of the arc diameter
`terminalBarLengthRatio`	Terminal bar length	number	advanced	appearance	`1.5`	Terminal bar length as a multiple of the arrowhead width
`labelPosition`	Label position	number	advanced	appearance	`0.6`	Position of the P label along the straight portion
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height
`resolution`	Resolution	number	advanced	appearance	`64`	Number of segments in a full 360° sweep.

Forward Passage of Lines

344100forward-passage-of-linesline3 points

Passes one force through another force's positions toward the enemy.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the straight-line length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.12`	Arrowhead base width as a ratio of the straight-line length
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height
`arcSegments`	Arc segments	number	advanced	appearance	`32`	Number of straight segments used to approximate the semicircular arc

Rearward Passage of Lines

344200rearward-passage-of-linesline3 points

Passes one force through another force’s positions while moving away from the enemy.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the straight-line length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.12`	Arrowhead base width as a ratio of the straight-line length
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height
`arcSegments`	Arc segments	number	advanced	appearance	`32`	Number of straight segments used to approximate the semicircular arc

Defeat

344300defeatpoint1 point

Renders an enemy force unable or unwilling to achieve its objectives.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`sizePixels`	Size (screen)	number (px)	standard	appearance	`80`	Width of the complete symbol in screen pixels.
`sizeMeters`	Size (ground)	number (m)	standard	appearance	—	Overall width of the static symbol.
`rotation`	Rotation	number (°)	standard	appearance	`0`	Clockwise rotation of the static symbol.
`crossAngle`	Cross angle	number (°)	advanced	appearance	`80`	Opening angle between the two right-hand arms. Changes height while preserving width.
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around the doctrinal letter, as a ratio of its resolved height.

Disengage

344400disengageline3 points

Breaks contact with the enemy to enable another mission or avoid decisive engagement.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.12`	Arrowhead length as a ratio of the straight-line length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.12`	Arrowhead base width as a ratio of the straight-line length
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height
`arcSegments`	Arc segments	number	advanced	appearance	`32`	Number of straight segments used to approximate the semicircular arc

Evacuate

344500evacuateline4 points

Removes personnel or materiel from a threatened area.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.1`	Arrowhead length as a ratio of the PT. 2-to-PT. 4 span
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.12`	Arrowhead base width as a ratio of the PT. 2-to-PT. 4 span
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height
`curveSegments`	Curve segments	number	advanced	appearance	`48`	Number of straight segments used to approximate the circular arc
`circleSegments`	Circle segments	number	advanced	appearance	`64`	Number of straight segments used to approximate the assigned-unit circle

Turn

344700turn-mission-taskline2+ points

Forces an enemy force from one avenue of approach or movement corridor to another.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.14`	Arrowhead length as a ratio of the rear-to-tip distance
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.14`	Arrowhead base width as a ratio of the rear-to-tip distance
`arcSegments`	Arc segments	number	advanced	appearance	`64`	Number of line segments approximating the quarter-circle shaft.
`labelPadding`	Label padding	number	advanced	appearance	`0.3`	Extra clearance around labels, as a ratio of the label height

99Generic Graphics08

Block Arrow

990001block-arrowline3+ points

Solid filled arrow with a controllable shaft width and selectable head (triangle, barbed, concave, diamond, harpoon, swallowtail, tee). Not a doctrinal symbol.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`arrowheadStyle`	Arrowhead style	enum`"triangle""barbed""concave""diamond""harpoon""swallowtail""tee"`	standard	appearance	`"triangle"`	Arrowhead silhouette
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the shaft's corners by curving it through the control points.
`filled`	Filled	boolean	standard	appearance	`true`	Fill the body solid; when off the arrow is drawn as an outline only.
`shaftWidthRatio`	Shaft width	number	advanced	appearance	`0.06`	Shaft band width as a fraction of the total path length
`rearWidthRatio`	Rear width	number	advanced	appearance	`0.06`	Width at the rear of the shaft as a fraction of the total path length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.18`	Arrowhead base width as a ratio of the total path length
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.22`	Arrowhead length as a ratio of the total path length
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled

Classic Arrow

990002classic-arrowline2+ points

Clean straight arrow with a selectable head (triangle, barbed, concave, diamond, harpoon, swallowtail, chevron, circle, tee, open). Not a doctrinal symbol.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Round the shaft's corners by curving it through the control points.
`arrowheadStyle`	Arrowhead style	enum`"triangle""barbed""concave""diamond""harpoon""swallowtail""chevron""circle""tee""open"`	standard	appearance	`"triangle"`	Arrowhead silhouette
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled
`arrowheadLengthRatio`	Arrowhead length	number	advanced	appearance	`0.2`	Arrowhead length as a ratio of the total path length
`arrowheadWidthRatio`	Arrowhead width	number	advanced	appearance	`0.14`	Arrowhead base width as a ratio of the total path length

Line

990101lineline2+ points

A non-doctrinal free polyline through two or more control points.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Curve the path through the control points.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.

Polygon

990102polygonarea3+ points

A non-doctrinal free polygon with one outer ring.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`smooth`	Smooth	boolean	standard	appearance	`false`	Curve the path through the control points.
`filled`	Filled	boolean	standard	appearance	`false`	Fill the interior instead of rendering an outline only.
`smoothResolution`	Smooth resolution	number	advanced	appearance	`12`	Number of samples per segment when smooth mode is enabled.

Rectangle

990103rectanglearea3 points

A non-doctrinal oriented rectangle defined by three adjacent corners.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`filled`	Filled	boolean	standard	appearance	`false`	Fill the interior instead of rendering an outline only.

Circle

990104circlearea2 points

A non-doctrinal circle defined by a center and radius point.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`filled`	Filled	boolean	standard	appearance	`false`	Fill the interior instead of rendering an outline only.
`resolution`	Resolution	number	advanced	appearance	`64`	Number of segments in a full 360° sweep.

Sector

990105sectorarea3 points

A non-doctrinal range-fan sector defined by an anchor and two radial edge points.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`filled`	Filled	boolean	standard	appearance	`false`	Fill the interior instead of rendering an outline only.
`resolution`	Resolution	number	advanced	appearance	`64`	Number of segments in a full 360° sweep.

Text

990201textpoint1 point

A non-doctrinal free-standing text label anchored at a single point.

Parameters

Key	Label	Type	Tier	Role	Default	Description
`text`	Text	text	primary	content	`"Text"`	The text to render. Explicit line breaks are honored; it never auto-wraps.
`textAlign`	Alignment	enum`"left""center""right"`	standard	appearance	`"center"`	Placement of the text block relative to the anchor: left/right put the anchor at that edge, center centers it; lines justify the same way.
`textStyle`	Style	enum`"regular""italic""light""caps"`	standard	appearance	`"regular"`	Typography preset.
`rotation`	Rotation	number (°)	standard	appearance	`0`	Clockwise rotation in degrees.
`sizePixels`	Size (screen)	number (px)	standard	appearance	`24`	Text height in screen pixels.
`maxSizePixels`	Max size (screen)	number (px)	standard	appearance	`200`	Hide the text once its on-screen size exceeds this.

Catalog ​

11Command and Control Lines04

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

12Command and Control Areas07

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

14Maneuver Lines23

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Parameters

Parameters

Parameters

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Parameters

Text amplifiers

Parameters

Text amplifiers

15Maneuver Areas33

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Parameters

Text amplifiers

Catalog